ERGELIT-Fix 35
ERGELIT-Fix 35
Grouting mortar
Art. No.: HTD-21000
Early-strength WW mortar for the renovation of manhole frames & kerbstones or grouting machine anchors, foundations, posts, pipe penetrations and much more.
Further properties
ERGELIT- Fix 35, is the right cementitious base grout with early strength and a coarser grain size of 4mm maximum grain size. This unique mortar has also been tempered with organic and inorganic additives to achieve good performance.
ERGELIT-Fix 35 is an early-strength, one-component grouting mortar that has been specially developed for filling gaps in raised manhole covers of all types and designs. It is also perfect for grouting machine foundations, posts, bridge railings, slabs, pipe penetrations, turbines, precast concrete parts, rail chairs, rolling mills and for renovating kerbstones, steps and small concrete floor areas.
With its solid properties of a certified WW mortar, the early strength and the highly flowable to plastic consistency, this mortar is the right basic product in the field of grouting mortars. You can rely on ERGELIT-Fix 35 to withstand high stresses and provide reliable performance over the long term.
- Early high-strength, shrink-free
- Sources > 0.1 volume %
- Resistant to frost and de-icing salt
- Flowability > 65 cm
- Acid and alkali resistant between pH 6-10
- Chloride-free, oil-resistant
- High resistance to dynamic stress
- Impermeable to water
- Good adhesive strength
- Largest grain size: 4 mm
Special features
- Early strength and with all the advantages of a high-quality mortar - in grain sizes up to 4 mm
- Achieves a compressive strength of approx. 5 N/mm² N/mm2 after approx. 2 hours
- Resistant to frost and de-icing salt
- Acid and alkali resistant between pH 6-10
- Impermeable to water
Application
- Consistency: highly flowable, can also be applied plastically with a working time of approx. 15-30 minutes
- Particularly recommended when strong crack resistance and edge protection are required
- For filling gaps in raised manhole covers > 10 mm in height of any type and design
- Casting of machine anchors, machine foundations
- Casting of posts, bridge railings, slabs
- Pouring in pipe penetrations
- For renovating kerbs, steps and small concrete floor surfaces
- For casting turbines, precast concrete parts, rail chairs, rolling mills
English 
Deutsch 
Français 
Čeština