ERGELIT-KT10
ERGELIT-KT10
Coating mortar
Art. No.: HTD-20003
All-rounder WW mortar for almost all areas: Masonry mortar, coating mortar and as repair mortar
Further properties
The high-quality cementitious one-component WW coating mortar ERGELIT-KT10 is characterized by the following outstanding features:
Versatile application possibilities: Regardless of whether you prefer manual coating, the wet spray process or the centrifugal process (KS-ASS), ERGELIT-KT10 can be used in all these processes in municipal wastewater.
Tested quality: ERGELIT-KT10 has been tested in accordance with DIN 19573 XWW3-B1 and meets the strict quality standards. This guarantees you reliable performance and an effective coating. With ERGELIT-KT10, you can rely on a product that meets the highest requirements and offers you long-lasting protection.
Fast water resistance: Time is precious, and with ERGELIT-KT10 you save valuable time. ERGELIT-KT10 is water-resistant after just 4 hours at a temperature of 20°C.
Acceleration with ERGELIT-10S Special: For even faster curing, ERGELIT-KT10 can be accelerated with our ERGELIT-10S Special. This saves you additional time and optimizes your workflow.
ERGELIT-KT10 also enables the application of layer thicknesses of up to 1 cm in a single trowel stroke. This feature allows you to tackle demanding tasks and work efficiently.
Frequently used for reprofiling work: Our customers often use ERGELIT-KT10 for reprofiling work. With this corrosion protection mortar, you can effectively repair and restore damaged surfaces.
- Grain size up to 1 mm
- Consistency: plastic to stiff-plastic
- Corrosion protection against municipal wastewater between pH 3.5 - 12
- Early strength, chloride-free
- Shrink and shrinkage-free in the pipe
- Sources > 0.1 volume %
- Frost and de-icing salt resistant
- Acid and alkali resistant between pH 5-10
- High resistance to dynamic stress
- High abrasion resistance
- Waste water temperature: short-term peaks up to 100° C, long-term up to 90°
- Good adhesive tensile strength
- Low rebound under good spraying conditions
- Sulphate-resistant
- Resistant to frost and de-icing salt
- Impermeable to water
Special features
- Is tested according to DIN 19573 XWW3-B1
- Is perfectly suited for wastewater shafts with municipal wastewater
- Can be applied by hand coating, wet spraying and centrifugal processes
- Can be exposed to water after 4 hours (at 20°)
Application
- Coating of concrete and masonry shafts, sewers and storage tanks
- Suitable for the wet spraying process or the KS-ASS coating system
- Also suitable for the construction of new sewers and masonry
- Bonding bridge already integrated in the product
- Can be applied in layer thicknesses of up to 1 cm in one trowel stroke
- In good conditions also overhead
- Reprofiling of break-outs and defects in shafts, as well as sealing of joints > 2 mm, sewers and storage tanks, and surface leveling in masonry shafts
- Sealing against pressing groundwater
- Pumpable up to 100 m
- Long processing time
- Can be used in drinking water protection zones
English 
Deutsch 
Français 
Čeština